top of page

Titanium Foam

  • Filtration accuracy: 0.45um-100um

  • Porosity: 28-50%

  • Transmittance rate: 0.02-20M3cm/m2h.mmH2O

  • Compressive strength: 0.5-1.5Mpa

  • Temperature resistance: 280 ° C (wet state)

  • Maximum working pressure range: 0.6Mpa

  • Precision: 0.22 µm 0.45 µm 1 µm 3 µm 5 µm 10 µm 20 µm 30µm  50 µm 80 µm 100 µm
     

Product Showcase
Properties
  • Titanium foam is made of high-purity titanium powder as raw material, processed by sieving, cold iso-static pressing, high temperature, high vacuum sintering. 

  • Uniform structure, narrow pore size distribution and high separation efficiency.

  • High porosity, low filtration resistance and high penetration efficiency.

  • High temperature resistance, generally can be used below 280 degrees.

  • Good chemical stability, acid and alkali corrosion resistance, with antioxidant properties.

  • No particles fall off, do not make the original liquid secondary pollution, in line with food hygiene and pharmaceutical GMP requirements.

  • Good mechanical properties, can be filtered by suction filtration, easy to operate.

  • Low pressure difference, small footprint, large flow.

  • Strong anti-microbial ability, does not interact with microorganisms.

  • Under good molding process, and the overall length can be up to 1000 mm.

  • Can be regenerated, easy to clean, long service life (usually several times of a ordinary membrane filter)
     

Applications

With its unique properties, titanium foam can be widely used in the pharmaceutical industry, water treatment industry, food industry, bioengineering, chemical industry, petrochemical, metallurgical industry and gas purification. It is a new material with broad development prospects.
 

Typical uses include:

  1. In the infusion of the pharmaceutical industry, small injections, eye drops, decarbonization filtration in the concentration of oral liquids, and security filtration before terminal filtration in the lean distribution.

  2. Removal of impurities in the production process of raw materials, decarbonization filtration and fine filtration of materials.

  3. Security filtration of ultra-filtration, RO, EDI systems in the water treatment industry, filtration after ozone sterilization and ozone aeration.

  4. Clarification and filtration of beverages, white sprinkles, beer, vegetable oil, mineral water, soy sauce and vinegar in food and beverage.

  5. Decarbonization filtration and precision filtration of liquid products, liquid raw materials and pharmaceutical intermediates in the chemical industry, ultra fine bodies, catalyst recovery, precision filtration after resin adsorption, system heat transfer oil, material removal and impurity filtration, catalytic gas Purification and so on.

  6. Oilfield back-flow water filtration, security filtration before reverse osmosis in the desalination field.

  7. High-temperature decarbonization and de-whitening filtration in the dye industry.

  8. Filtration of steam, compressed air, catalyst, etc. in gas purification.

  9. As an electrolytic electrode, it can maximize the electrolysis area and increase the gas evolution rate.

Fun Facts about Titanium

Titanium is a chemical element with the symbol Ti and atomic number 22. Chinese name 钛. It is a lustrous transition metal with a silver color, low density, and high strength. Titanium is resistant to corrosion in sea water, aqua regia, and chlorine.

bottom of page